We recommend that instruments are returned to Rhopoint or an accredited service centre on a yearly basis. Current generation instruments will remind you when the recalibration is due.
Table of Contents
Related FAQs
FAQ Categories
How often should I return my instrument to manufacturer for calibration?
Related products
![Flow cup afnor](https://www.rhopointinstruments.com/wp-content/uploads/2022/04/flow-cup-afnor.png)
AFNOR Viscosity Flow Cup
- 2mm - 8mm orifice diameter
- 15 – 3000 cSt viscosity range
- 25 -150 sec flow times
- Supplied with a certificate of conformity
- Sheen 419/2.5, 419/4, 419/6 & 419/8 equivalent
![Flow cup astm iso](https://www.rhopointinstruments.com/wp-content/uploads/2022/04/flow-cup-astm-iso.png)
ASTM D1200 Viscosity Flow Cup
- 2.1mm - 5.8mm orifice diameter
- 10 – 1200 cSt viscosity range
- 30-100 sec flow times
- Supplied with a certificate of conformity
- Sheen 406/1, 406/2, 406/3, 406/4 & 406/5 equivalent
![rub resistance tester cutter](https://www.rhopointinstruments.com/wp-content/uploads/2021/11/usc-dies-from-above-circle-samples.jpg)
Bespoke cutter die – 1 or 2 of the same shape
Bespoke cutter die - 1 or 2 of the same shape