Table of Contents
Related FAQs
FAQ Categories
Do I need to send my instrument and tile for calibration or just tile?
You will need to send both for a full calibration. The gloss meter must be used with a certified standard for traceable results. It has its linearity tested against NIST standards. The tile has a value assigned. When the instrument is calibrated on the provided tile, the results are traceable to our NIST certification in accordance with BS EN ISO 2813, which is the main standard for the measurement of gloss.
We do have a tile-only calibration option however, we would recommend that this is used only for additional tiles.
Related products
Aesthetixยฎ: The Ultimate Surface Finish Solutionโ
- Fully characterise all aspects of appearance perception - Why does this matter?
- Modular solution: Surface Brilliance | Textureย | Effect Finish
- Aesthetixยฎ can be used in-laboratory, portable in-field, inline in the production environment or as part of a Cobot / Robot solution
- Measures flat surfaces, curved parts and small surface areas
- Affordable technology starts at ยฃ5,500
AFNOR Viscosity Flow Cup
- 2mm - 8mm orifice diameter
- 15 โ 3000 cSt viscosity range
- 25 -150 sec flow times
- Supplied with a certificate of conformity
- Sheen 419/2.5, 419/4, 419/6 & 419/8 equivalent
ASTM D1200 Viscosity Flow Cup
- 2.1mm - 5.8mm orifice diameter
- 10 โ 1200 cSt viscosity range
- 30-100 sec flow times
- Supplied with a certificate of conformity
- Sheen 406/1, 406/2, 406/3, 406/4 & 406/5 equivalent
Bespoke cutter die – 1 or 2 of the same shape
Bespoke cutter die - 1 or 2 of the same shape
