Interpreting Results- Cross-cut Adhesion Module
How Does Aesthetix Measure Cross-cut Adhesion?
The Aesthetix measures cross-cut adhesion using its Cross-cut Module, which is designed to evaluate coating adhesion strength based on the ISO 2409 standard. This involves creating a grid of cuts through the coating down to the substrate and analysing the extent of coating detachment after adhesive tape is applied and removed.
Measurement Process:
Grid Creation: The Aesthetix creates a standardised grid with six horizontal and six vertical cuts, spaced 2.0 mm apart, with a cut thickness of 0.2 mm.
Image Capture: High-resolution images of the cross-cut area are captured.
Analysis: The software analyses the grid for coating detachment, identifying areas where the coating has peeled or flaked.
Quantification: Results are expressed as the percentage of remaining coating within the grid, providing an objective measure of adhesion.
This automated process ensures repeatable and accurate results, eliminating subjective errors often associated with manual evaluations.
Measurements Provided by Aesthetix for Cross-cut Adhesion
The Aesthetix provides several metrics to quantify cross-cut adhesion:
Remaining Coating Percentage: The percentage of intact coating remaining within the cross-cut grid after testing.
Cut Detection Threshold: Adjustable sensitivity for distinguishing adhered and detached coating areas.
Grid Overlay Accuracy: Ensures precise alignment of the measurement grid with the cross-cut area.
Comparison and Application:
Use Remaining Coating Percentage for general adhesion strength assessment.
Adjust the Cut Detection Threshold for coatings with varying contrast or brightness relative to the substrate.
For coatings with low absorption or challenging substrates, use the Invert Map setting to improve detection accuracy.
For most applications, the Remaining Coating Percentage is sufficient for quality control purposes, while threshold adjustments are useful for specific materials or substrates.
Visualising Cross-cut Adhesion Using Appearance Elements
The Rhopoint Appearance Elements software provides tools to visualise cross-cut adhesion:
Open Cross-cut View:
Navigate to the "Cross-cut Module" in the software.
View a live image of the cross-cut area with an overlaid grid.
Analyse Remaining Coating:
Use colour-coded overlays (e.g., green for adhered areas, red for detached areas) to visualise adhesion performance.
Adjust grid alignment or detection thresholds if needed.
Detailed Metrics Display:
Access quantitative results in a dedicated results panel, including remaining coating percentage and cut spacing/thickness parameters.
Export Results:
Save images and data for reporting or further analysis.
Improving Coating Adhesion
To improve coating adhesion:
Surface Preparation:
Clean surfaces thoroughly to remove contaminants like oils, dust, or residues.
Use surface treatments such as sanding, etching, or priming to enhance mechanical bonding.
Coating Formulation:
Adjust binder content in paint formulations to improve adhesion properties.
Include additives that promote better wetting and bonding with substrates.
Application Process:
Ensure consistent application thickness and uniformity.
Avoid application in high humidity or extreme temperatures that could affect curing.
Curing Conditions:
Follow recommended curing times and temperatures to ensure proper film formation and bonding.
Substrate Compatibility:
Select coatings compatible with specific substrate materials (e.g., metals, plastics).
By combining these adjustments with precise measurements from Aesthetix, manufacturers can enhance coating performance and ensure compliance with quality standards.